Sears 385. 17526 - Manual (Page 41)

SECTION 3. LEARN THE STITCHES
o Embroidery
Set the Machine
r
Stitch wtdth
contro! 1 to 5
Top thread tension
corslrol 2 to 6
Stitch length control
any number (not
necessary to adjust)
Mo presser
foot
Stretch Stitch
Drop Feed lever É
Here's How
1. Drop the feed dogs (see page 35).
2. Remove loot holder (see page H).
3. Adjust the stitch width as desired
(see page 24)-
4. Draw the design on to the fabric with
tailor's chalk.
5. Stretch the fabric between embroidery
hoops and place under the needle.
6. Lower the presser toot lever to engaged
the thread tension.
7. Holding the top thread In your left hand,
rotate the hand wheel toward you one
complete turn.
Pull the top thread to draw bobbin
thread through to the surface ot the
fabric.
8. Using a medium speed, stitch along the
marked outline, guiding the fabric
carefully by hand.
9. When finished embrodlering, raise the
feed dogs (see page 35).
An embroidery foot is an o ptional item
for all models. Available at many sears
stores.
39