Sewing thin or light weight fabrics, Darning and monogramming – SINGER WS1112 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING THIN OR LIGHT WEIGHT FABRICS
When lighter pressure is required to sew satisfactorily on thin
silk or filmy material, the pressure cap should be about halfway
down.
Release all the way by pressing the snap look, C®, Fig. 17)
and then press cap C®, Fig. 18) down again to halfway spot.
DARNING AND MONOGRAMMING
In order to move the fabric freely in any direction for darning,
mending and certain kinds of free-hand embroidery, release the
cap C®, Fig, 18) completely by pressing down on the snap lock,
C®, Fig. 17). Set the drop feed dial (Fig.l6) to "DOWN." which
drops the feed well below the needle plate. To return feed to
normal, set to "UP", push cap down (Fig. 18).