Placing of pattern cam for embroidery sewing – SINGER WS1112 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
11
4ft:
©
s
Pattern Cam and box
PLACING OF PATTERN CAM FOR
EMBROIDERY SEWING
1) Use regular zigzag pressure
foot and needle plate.
2) Open the cam cover lid ®.
Fig. 20.
3) Set buttonhole dial to M
position on panel.
4) Turn zigzagicontrol diallto
position 5 this permits the
insertion of cam on to the
spindle ®. Revolve cam, pressing
down slightly tmtil hole in bottom surface is fitted over pin ®,
5) Close cam cover lid and return zigzag Control dial to "0"
position.
6) Set stitch length between O and 1 for effect desired the shorter
the stitch length the greater the density of pattern sewn.
Needle position can be set at left (L), middle (M) or right (R).
Each position alters the basic stitching line and designs sewn.
IMPORTANT When using Cam |20 (blind hem cam) for blind
hemming, set needle position lever to "R" position.
Fig. 20