SINGER WS1112 - Manual (Page 11)

10
1» /
Fig. 19
STRAIGHT STITCHING
® Set needle position lever to L position.
(D Set Buttonhole disc ((D) indicator on M position.
(D Set zigzag width contrl dial ® at "O" Position.
_ „
® Select desired stitch length by turning stitch length dial ® 0 5^
For more precise straight stitching on special fabrics this machme
eqX^rwith a straight stitch needle plate (#10 page23) and straight
stUch^resser foot (#11,Page 23) please note both accessories have
a small round hole instead of the wide slot as used for zigzag
The crosswise slot-needle plate and prsser foot-allow t e
®
sideways (zigzag) while moving up and down. A cam is not required
for straight stitching. , , .
To change needle plate, remove the setting screws on the plate.
replace with straight stitch needle plate and tighten screws securely.
When straight sewing with the regular zigzag needle plate and^^^^^^^
presser foot the needle can also be positioned in the M (middle)
piosition.
ZIGZAG STITCHING
® Use regular zigzag presser foot and needle plate.
(
2 ) Cams are not required for normal zigzag sewmg.
® Set needle position lever to L, M or R position, preferably L.
® Set buttonhole dial to M position on panel.
® Select width desired from 0 to 5 on zigzag width knob.
® Length of zigzag stitch can be varied by increasmg the size of
©M^tSf virinces are possible by changing needle position,
stitch widths and stitch lengths.