Removing and attaching the presser foot – SINGER W1422 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Turn the balance wheel towards you until the needle is at its highest position.
Raise the presser foot by lifting the presser foot lifter.
By lifting the lever on the back of the foot holder, the presser foot will drop off.
Note: *Do not force the presser foot to remove it.
REMOVING AND ATTACHING THE PRESSER FOOT
Place the presser foot so that the pin on the foot lies just under the groove of the
foot holder. Lower the foot holder.
When the presser foot lifter is raised you'll find the presser foot is locked in place.