SINGER W1422 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWING BLIND HEMS
presser foot...........................................
Pattern selector.................................... C(
)
Stitch length dial.................................. 1 to 3
1
.
2
.
3.
4.
Turn up the hem with the desired width and press. (Fig. 1)
Fold hem back against the right side of the garment with
top edge of hem extending about 4 mm (1/6 inches) to the
right side of the garment folded. (Fig.2)
Place the garment under the foot so that double-folded edge
runs along the hem|guide and lower the foot.
Sew slowly for better control, marking sure the narrow
zigzag stitches will fall on the hem edge and wide zigzag
stitches will just catch one thread of folded edge. (Fig. 3)
Unfold the fabric and you will have a blind stitch hem
(Fig. 4)
(Fig. 4)
,
3 0
-