SINGER W1422 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STITCH LENGTH DIAL REVERSING BUTTON AND DROPPING THE FEED
To change the length of the stitches proceed as follows:
Turn the dial so that the number for the required stitch
length Is at setting mark. The numbers indicate the ap
proximate
stitch
lengths
in
mm.
The
lower
the
number,
the shorter the stitch.
REVERSE STITCH:
Press center of the stitch length dial (reversing button) and
hold
for
reverse
stitching.
Fabric
will
immediately
start
feeding
backwards.
Release
button
and
machine
will
resume normal forward sewing.
Very useful for fastening ends of seams and darts without
having to tie threads, and for strengthening seams.
DROPPING THE FEED DOG:
Embroidering
and
darning
are
best
carried
out
with
the
feed
mechanism
disengaged.
This
is
done
by
setting
the
stitch length dial at , which drops the feed and allows
the material to be moved freely under the needle.
The feed starts its normal function again as soon as you
turn the stitch length dial to "0" or beyond it.
1 if -