SINGER W1422 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WINDING THE BOBBIN
1.
Release clutch by turning clutch knob
toward you.
2.
Draw
thread
from
spool
through
bobbin winder tension disc as shown.
3.
Pull end of thread through hole in
bobbin as shown.
4.
Place
bobbin
onto
bobbin
winder
shaft with end of thread coming from
the
top
of
the
bobbin.
Push
bobbin
winder shaft to the right until it clicks.
Holding
onto
end
of
thread,
start
machine.
When
bobbin
is
slightly
filled, snip off end of thread.
5.
Wind
thread
until
winder
stops.
Remove bobbin. Clip thread.
6. Tighten clutch knob.
Advertising