SINGER W164 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Thread or lint in
1—With take-up lever In highest position, tilt
head back on hinges and remove bobbin case.
2— Turn clamps outward and remove race cover.
3— Remove hook.
4— Clean thread and lint from all parts, includ
5— Run a drop of oil along rim of hook.
6— Replace hook, then race cover. Snap clamps
7— Grasp threaded bobbin case by latch and re
place, fitting tongue into notch of race cover.