SINGER W164 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
. . L ___
38
Loosen both head hinge set screws
until head hinge hole is clear.
Tilt head hinge fingers up and back
as iar as they will go.
Careiully slip head onto head hinges
- - making sure lingers are inserted
as iar as they can go into head hinge
holes.
4.
Allow the head to rest in its tilted-
back position.'
5.
Tighten both set screws securely with
screw driver.
6.
Plug electrical leads into sockets lo
cated inside cabinet. Cord identified
with "motor" tag must be plugged
into
socket
marked
"motor".
Un
tagged cord goes to "light" socket.
Advertising