SINGER W164 User Manual

Page 23

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Fig. 27

EDGESTITCHER

The edgestitcher is used in mak­

ing

dainty

lace

insertions,

edgings

and piping.

The

slots

in

the

edgestitcher

serve as guides in sewing together

various pieces of material. If you
want to sew lace, lace and embroi­
dery, or lace and tucked strips togeth­
er, place the piece of material that
will be on top in slot 1 (Fig. 28)

and the lower fabric in slot 4. For
instance, if you are sewing lace edg­

ing to a finished edge of fabric place
the fabric in slot 1 and the lace in

slot 4, (Fig. 29).

21

ATTACHMENTS

Be sure the needle positioning lever is in the

extreme left hand position.

ATTACHMENT FOOT

^ order to attach the binder, edgestitcher and

the hemmers, it is necessary to remove the presser
foot and replace it with the attachment foot. (Fig. 27)

Mount

binder,

edgestitcher

or

hemmers

sliding

the attachment to the left as far as possible and

tighten screw.

The mounting slot enables you to sew as close

to or as far away from the edge as desired. Just move
the attachment to the correct position before tighten­

ing the mounting screw.

Fig. 29

Fig. 28

Advertising