Changing needle – SINGER W221N User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Changing Needle

Set

needle

position by
towards you.

in

the

highest

turning handwheel

Loosen needle clamp screw and

take out needle.

With flat face away from you,
insert a new needle into groove
of needle bar.

Push needle until it reaches

stopper

(D

and tighten needle

clamp screw firmly.

Always use a straight needle with
a sharp point.

Using defective or worn needles
not only causes stitch skipping,
breakage of needles or snapping
of thread; it also can damage
hook and needle plate.

Proper needle

straight shaft

sharp point

cm

><s

Advertising