Presser foot lifter, Button – SINGER W221N User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Place fabric under foot about 1
cm (0.4") inside the edge.
Lower presser foot lifter.
Presser Foot Lifter
In order to obtain wider gap
when using very thick materials,
firmly push presser foot lifter up
as far as it will go.
To reinforce seam, sew back
wards to the edge of fabric by
pushing down reverse sewing
button.
Release
button
-and commence
forward sewing guiding fabric
by
hand as it is fed.
Never pull material.
■19-
Advertising