Adjusting lower tension – SINGER W221N User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Adjusting Lower Tension
To test bobbin tension, hsng and
shake bobbin case as shewn.
At proper tension bobbin case
will
gradually
drop
a
small
amount.
To adjust tension, turn adjusting
screw with small screwdriver.
Raise needle in the highest
position.
Leave end of thread of about 10
cm (4") from bobbin case.
Take hold of latch and push
bobbin case into hook.
Release latch when bobbin case
is fully inserted*
-12-
Advertising