B. location of the dryer – Maytag MC2 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The tumblers of the 30, 50, and 75 lb. model dryers are supported during shipping by a wooden block.
Remove the block before starting the dryer.
The lint coops of the 30, 50, 75, and 100 lb. model dryers are supported during shipping by a bracket.
Remove this bracket before starting the dryer.
100 ib. Model ONLY - The V-belts are disconnected from the tumbler drive motor for shipping.
Reconnect the belts before starting the dryer.
B. LOCATION OF THE DRYER
Before installing the dryer, be sure the location conforms to local codes and ordinances.
The dryer must be installed on a sound, level floor capable of supporting its weight. It is recommended that
carpeting be removed from the floor area on which the dryer is to rest.
It is recommended that the rear of the dryer be positioned about two (2) feet away from the nearest
obstruction (i.e., wall) for ease of installation, maintenance and service.
NEAREST COMBUSTIBLE
0" PERMITTED i1"-2" SUGGESTED FOR EASE OF MAINT )
(2.52-5,08 CM)
BONNET EXTENDS UP 1 3/2' ABOVE DRYER ON ALL MODELS
MAN3727
INSTALLATION DRYER CLEARANCE TO ADJACENT WALL STRUCTURES.