SINGER W815 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1. REGULATING THE STITCH LENGTH
The length of the stitch can be changed with the stitch length dial (Fig. 15). In
order to set machine at a certain length of stitch, turn the stitch length dial until
the indicator is facmg the selected number on the scale. The length of the stitch is
variable from 0-5. The normal stitch lenght is 2.
a Regulate the length of the stitch as for forward sewing.
b. Push reverse stitch button located in the centre of the stitch length dial (Fig.
15) as far as it wiM go. The machine will remain sewing in reverse while the
reverse stitch button is depressed. When released the machine resumes forward
sewing with the same stitch length.
Fig 15
12. REGULATING THE DROP FEED
The DROP FEED is located on the bed of the machine (Fig 16).It regulates the
height of the feed dog for sewing normal material, for darning and embroidering.
1. For darning, embroidering and monogramming, turn the knob to left
"DOWN" place and the feed mechanism will be lowered under the level of
theneedle plate, so that the material can be moved freely.
2. For normal sewing turn the knob to the right UP place.
■ 1 0 -