Preparing to sew, Starting to sew – SINGER W815 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. PREPARING TO SEW
1. Hold
the
end
of the upper-thread with the left hand, leaving
it
slack from the hand to the nee'dle.
2, Turn the balance wheel towards you to lef the needle bar to its
highest position.
3 Pull the thread you are holding, and the lower thread will be brought
up with it through the hole in the needle plate, as shown (Fig. 10).
4, Place both ends of the upper and lower thread under and to the back
of the
Dresser
foot fFig. 11).
9. STARTING TO SEW
1
Place the fabric to be sewn beneath the presser foot.
2. Lower the presser foot by lowering the presser bar lifter.
3. Start sewing by slowly turning the balance wheel towards you while
gradually working the foot control,
always
turn
balance
wheel
towards
YOU!