Titching in reverse – SINGER 6423 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
KEEPING SEAMS STRAIGHT
Line up fabric with guideline (1)
on needle plate.
TURNING SQUARE CORNER
When stitching reaches desired
pivot point, stop stitching.
Lower needle into fabric.
Turn fabric.
Ml
Continue stitching seam.
I
TITCHING IN REVERSE
Secure beginning and end of seam
as shown.
• Press reverse lever for steps 1 and
3.
USING SEAM GUIDE
•
To attach seam guide, place screw
of guide into hole (1).
• Position guide for desired seam
allowance.
Hand tighten screw.
To sew curved seams, attach seam
guide at an angle.
—
9
—
Advertising
This manual is related to the following products: