Attaching feed cover – SINGER 6423 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
CHANGING PRESSER FOOT
REPLACING PRESSER FOOT WITH SHANK
TO REMOVE-
• Lift toe of presser foot
until it snaps off shank.
• Take foot off machine.
JZy
TO REPLACE-
• Center new presser foot
under shank(1).
• Lower presser foot lifter.
• Press presser bar (2) down.
ATTACHING FEED COVER
Press tab (1) and (2) into holes on
needle plate.
• Loosen presser foot screw and
remove foot.
Hook new foot around presser bar.
Tighten screw.
11
—
Advertising
This manual is related to the following products: