Sewfng on a button inserttng a zipper – SINGER 6423 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEWfNG ON A BUTTON
iNSERTtNG A ZIPPER
RECOMMENDED SETTINGS
stitch Selection: ^ig-Zag
Stitch Width;
i
I D I
Stitch Length; Feed cover
Presser Foot; Button sewing
• Attach feed cover.
• Raise thread through hole in the
feed cover.
• Center holes in button between
toes of foot.
• Lower needle into either hole of
button.
While slowly turning hand wheel,
adjust width so needle enters both
holes of button.
• Sew 8-10 stitches.
• Pull thread to back side and tie.
RECOMMENDED SETTINGS
Stitch Selection: Straight Stitch
Stitch Width:
j ' I I I I
d
D
h
Stitch Length: 1.5-3
Foot:
Zipper
• Baste zipper opening.
• Attach left side of foot to shank.
• Stitch zipper to seam allowance.
• Attach right side of foot to shank.
• Stitch zipper to seam allowance.
—
19
—