Blindstitch overedging and seaming – SINGER 6423 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BLINDSTITCH
OVEREDGING AND SEAMING
Fold hem to wrong side.
Pin or baste in place.
• Fold hem back as shown.
Place folded edge against
blindstitch guide.
Sew, allowing wide stitches to
barely enter edge of fold.
Adjust foot if necessary.
Turn fabric to right side and press.
There are four stitch patterns that
can be used for overcasting.
For overcasting edge of fabric to
prevent fraying.
For hemfinishing on fabrics to
prevent roiling.
Use with stretchy material which
tends to fray or foil.
• For stitching and finishing seams in
light weight fabrics.
• For overcasting edge of fabric to
prevent fraying.
For stitching and finishing seams in
heavyweight or stretch.
—
20
—