Connecting and running machine, Instruction symbols – SINGER 6423 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTING AND RUNNING MACHINE
CONNECTING-
Before plugging in your machine, be sure that the
voltage and number of cycles indicated on the
electrical data lable (1), conform to your electrical
outlet.
Plug controller (2), into receptacle, at the right end of
machine.
Then connect electrical power cord plug (3) to your
electrical outlet.
RUNNING-
Power on - press “1” side of switch.
Power off - press “0” side.
Press speed controller to run machine.
The harder you press, the faster
machine will sew.
INSTRUCTION SYMBOLS
To simplify understanding, the following symbols are used throughout the
operator’s manual.
Turn power off.
Press speed controller
Use hand wheel to
raise needle.
m
Lower presser foot.
Raise presser foot.
—
4
—