Winding bobbin – SINGER 6423 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
WINDING BOBBIN
Open slide plate.
Take out empty bobbin.
• Place thread and spool cap onto
spool pin.
• For best sewing performance use
proper spool cap.
Snap thread into thread guide.
• Wind thread counterclockwise
around bobbin winder tension dies.
• Thread bobbin and place on
spindle.
• Push bobbin to right.
• Hold thread end.
• Step on speed controller.
• Cut thread.
• Push bobbin to left.
• Press side opposite indent.
Advertising
This manual is related to the following products: