Zippers and piping (for 3 dial models) – SINGER 3810 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ Zippers and piping (For 3 dial models)
Set the pattern selector dial to (i) on 20 stitch pattern model.
Set the pattern selector dial to (A) on 25 stitch pattern model
Change to zipper foot.
The zipper foot can be attached right (1) or left (2) depending
on which side of the foot you are going to sew.
To sew past the zipper pull, lower the needle into the fabric,
raise the presser foot and push the zipper pull behind the
presser foot. Lower the foot and continue to sew.
It is also possible to sew in a length of cord, into a bias strip to
form a 'welt' (3).
Set stitch length control between 1-4 (according to thickness
of fabric).
Zipper foot
I
1
1
35