Applique – SINGER 3810 User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
□ Applique
Turn stitch length dial to the desired length.
Turn pattern selector dial as illustrated.
Turn stitch width dial to small width. (For 3 dial models)
Cut out the applique design and baste it to the fabric.
Sew slowly around the edge of the design.
Trim excess material outside the stitching. Make sure not to
cut any stitches.
Remove the basting thread.
Tie top and bottom thread under the applique to avoid
unraveling.
Stitch length dial
All purpose foot
(For 2 dial model)
(For 3 dial 20 stitch model)
51
Advertising
This manual is related to the following products: