Free motion darning (for 2 dial model) – SINGER 3810 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ Free motion darning (For 2 dial model)
* The darning foot is an optional accessory not included with
your machine.
I
Set stitch pattern selector on (¿) (1).
Move the drop feed control to right to lower the feed dogs.
Remove the presser foot clamp (2).
Attach the darning foot to the presser foot holder. The lever
(A) should be behind the needle clamp screw (B). Press the
darning foot on firmly from behind with your index finger and
tighten the screw (C) (3).
First sew around the edge of the hole (to secure the threads)
(4). First row: Always work from left to right. Turn work by 1/4
and oversew. An embroidery/darning ring is recommended
for easier sewing and better results.
Stitch length dial
Note: Free motion darning is accomplished without the
sewing machine internal feed system. Movement of the
fabric is controlled by the operator. It is necessary to
coordinate sewing speed and movement of fabric.
Optional
darning foot
(Available fromV^
your local dealer)
Note: Stitch length
cannot be
controlled with diel
as feed dogs are
lowered.
45