Sewing with the, Optional hemmer foot (for 2 dial model) – SINGER 3810 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
□ Sewing with the optional hemmer foot (For 2 dial model)
* The hemmer foot is an optional accessory not supplied with
your machine.
For hems in fine or sheer fabrics.
Set the stitch pattern dial to (
) (1).
Change to optional hemmer Foot.
Stitch length dial
Optional hemmer foot
(Available from your local dealer)
4
(
L. ct)
Neaten the edge of the fabric. At the beginning of the hem,
turn under the edge twice by about 3 mm (1/8") and sew 4-5
stitches to secure. Pull the thread slightly towards the back.
Insert the needle into the fabric, raise the presser foot and
guide the fold into the scroll on the foot (2).
Gently pull the fabric edge towards you and lower the presser
foot.
Begin sewing, guiding the fabric into the scroll by holding it
upright and slightly to the left (3).
36