Forward ^setting.the stitch length, Sewing in reverse – SINGER W1365 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
li
Forward
^SETTING.THE STITCH LENGTH
To ad ust th
stitching are both regulated by Lever 10, Fig. 12-B.
“«ease th!'
.utl
screw 11 and move lever 10 downward to
Tighten screw^ii
'^Pward to shorten it.
, his will set the stops for both forward and reverse stitching.
STITCH LENGTH CHART (Approximate)
N
‘Araber of stitch
es_per_inch_No Feeding
55
Wh
en
SEWING IN REVERSE
° seotn^T ■
reverse to tie the threads at the beginning or the end
reverse unH^^r
Fig. 12-B, up as far as it will go. The machine will sew
ever 10 is returned to its original position.
adjusting
the
tensions
-S ,• adjust th
ter.siou ■
^ ^PPer tension with the presser foot down,
the tens'
released when it is raised. To
(.-¡s Or clock^
upper thread, turn dial (Fig. 13) to
■ dumber on fi
To decrease, turn to the left. The higher
^ ^^sion be
The tighter the tension. Before adjusting
riecBc
machine is threaded properly,
"*-V/
p .
^“ssarv to
r*L
T
-ouj.,
l4j
Q ' . ^^snge the bobbin tension, turn small
side of the bobbin case clockwise to tighten,
® to loosen.
Fig. 13