SINGER W1365 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
TROUBLE CHART
27
Trouble
Probable Cause
Correction
If machines
bind
Thread or lint in race way
1.- With take-up lever in highest position,
tilt head back on hinges and remove
bobbin case.
RACE
2. - Turn clamps downward and remove race
cover.
3. - Remove hook.
4. - Clean thread and lint from all parts, in
cluding race.
5. - Run a drop of oil along rim of hook.
6
. - Replace hook, then race cover. Snap
clamps into place.
7. - Grasp threaded bobbin case by latch
and replace, fitting tongue into notch of
race cover.
L
Advertising