SINGER W1365 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
17
3. Hold ■
•
zigzag stitch width lever 2 in its extreme right-hand position, place cam on
^ ^mdle, apply slight pressure while turning cam until it slips down into place.
6 Zigzag stitch width lever to its extreme left-hand position and set the stitch
stil\
prefer it, but remember that most embroidery designs require a
® length of 1 or less for best appearance.
BLIND HEMS
COMPLETED
Fig. 26
p ^
i Presser foot and needle plate
D
control knob
Si,
1
®htch len "
ll
control knob at
0
.
^
control knob between 2 and 3.
manner as for hand hemming.
2
,
^ If hem with folded edge is used make first fold 3/8" deep.
Ste^ fold
depth desired and baste 1/4" from upper edge. Press into place.
BlI^ flace dack toward right side of garment leaving 1/4" extended.
l^®ai Or,
under presser foot and sew blind hem automatically.
^°tapleted.