Throat plate removal and replacement, To replace the throat plate – SINGER 431 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
THROAT PLATE
REMOVAL AND REPLACEMENT
To remove the throat plate
To replace the throat plate
Raise presser bar. Turn hand wheel until needle
bar is at its highest point. Open slide plate. Place
thumb under front end of throat plate and lift plate
from machine.
18
Place throat plate in position over two clamping
pins and press plate down until it snaps in locked
position. Then close slide plate.
Advertising