Adjusting points, The adjusting finger is used only for pleating – SINGER 431 User Manual
Page 75
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
fi'
% m % m m
# -is- # # # #' ь
ь
м
* * # # -i? « » # ■# # # 'i? i
Fork
Arm
Adjusting
Finger
Adjusting
Lever
This attachment offers a simple and effective way
to make gathered and pleated ruffles. Ruffles may
be made separately or made and applied at the
same time. The ruffler is attached to the machine
in place ctf the regular presser foot and is used with
a straight stitch setting only.
Straight stitch setting: AK 3
Throat plate: Straight stitch
Ruffler
Adjusting Points
The adjusting lever sets the ruffler for gathers or
pleats. The number 1 space setting is for gathers
and places fullness at every stitch. Numbers 6 and
12 are space settings for pleats, spacing them 6 or
12 stitches apart. The star is for straight stitching
and is used when grouping gathers or pleats.
The adjusting finger is used only for pleating
and affects the width of the pleat. It is thrown out
of action by bringing it out of contact with the
adjusting screw.
The adjusting screw regulates the fullness of
gathers or pleats. When turned inward to its limit
with the adjusting finger in place, the attachment
is set for its deepest pleat. When turned outward
to its limit, with the adjusting finger out of action,
the ruffler gives only a hint of fullness.
73