Seams, Flat felled seams, Knit fabric seams – SINGER 431 User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SEAMS
FLAT FELLED SEAMS
Zigzag stitching gives strength and durability to
flat felled seams.
Form the seam to the right side of the fabric,
taking full seam allowance, using a zigzag stitch
(BL 3).
Press the seam open, then fold and press the
two edges together, keeping the right side of the
zigzag stitch uppermost.
Trim away half the under seam edge.
Fold the upper seam edge evenly over the trim
med seam, and top stitch.
KNIT FABRIC SEAMS
A fine zigzag stitch (BL IV
2
) is ideal for seaming
knit
fabrics.
Particularly
desirable
for
underarm
seams, or other seams where elasticity and give
are needed.
For neckline and waistline seams, where a stay
is needed to prevent undue stretching, this same
stitch can be used to apply seam tape. To ensure
a flat, smooth finish, position the seam tape with
the edge exactly on the sam line. If seam is cur
ved, pre-shape tape to fit by steaming, and baste
in place.
Stitch, allowing the needle alternately to enter
the seam tape and seam line.
>.saw®l
'< '. .J
54