SINGER 431 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Procedure. Set Selector (AL) and Width Lever (see page 42). Place work under needle, aligning centre
marking of buttonhole with centre score line of Special Purpose Foot.
BUTTONHOLES (Cont'd.)
C
D
.. I..
® ''i .
, , . . v
Side Stitching. Position needle in fabric at point A. Lower foot and stitch to end of marking. Leave
needle in fabric at point B. Raise foot and pivot work on needle. Lower foot. Take one stitch without
changing Width setting, bringing work to point C.
Bai Tack. Adjust Stitch Width for bar tacks and take no less than six stitches. Stop at point D.
Side Stitching. Readjust Stitch Width for side stitching. Complete work to point E. Leave needle in fabric.
Final Bar Tack. Adjust Stitch Width for bar tacks, and take no less than six stitches in reverse, ending
at point F.
44