The cording foot, Applications – SINGER 431 User Manual
Page 65
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE CORDING FOOT
•f:
-i: #
# # # # f: |! # # # 'Is i| # # # # # t
This foot is designed to facilitate the placing of stitching close to a
raised edge. The hinged feature of this foot ensures even feeding over
pins, heavy layers of fabric or cross seams. It is attached to the machine
in place of the regular presser foot, and may be adjusted to either the
right or left side of the needle. Straight stitch or zigzag settings may
be used.
APPLICATIONS
Zip Fastener Insertions
Corded Seams
Tubular Cording
Slip Cover Piping
Preparation. Secure the cording foot to the pres
ser bar as you would the regular presser foot. Set
Selector and Lever. Adjustment to the right or left
of the needle is made by loosening the thumb screw
at the back. Check the position of the foot by
lowering the needle into the side notch, making sure
it clears the foot. Lock it into position bv tightening
the thumb screw.
63