SINGER 221K Featherweight - Manual (Page 11)

TO WIND BOBBIN—Continued
Place spool of thread on spool pin.
Thread machine as shown above.
Hold end of thread and start ma­
chine. (End of thread will break
oflf after a few coils have been
wound on bobbin.)
If thread doesn’t wind e^venly
on bobbin—
• Loosen screw which holds bobbin
winder tension bracket to bed of
machine.
• Move bracket to left if bobbin
winds high on right.
• Move bracket to right if bobbin
winds high on left.
• Tighten tension bracket screw.
When bobbin is full—
• Stop machine.
• L i f t b o b b i n
winder away
from belt.
• Remove bob­
bin.
• Tighten stop
motion screw.