Stitch length regulator, To set stitch length – SINGER 221K Featherweight User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
STiTCH LENGTH REGULATOR
IK K-'^x ^
Numerals on the indicator plate
stitches per inch.
To set stitch length—
• Turn thumb nut to the left.
• Set lever at desired stitch setting.
• Turn thumb nut to the right until
it rests against indicator plate.
Once the thumb nut has been
tightened, reverse stitching is accom
plished by raising the lever to its