Electrical information – SINGER 221K Featherweight User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ELECTRICAL INFORMATION
The SINGER* Electric Motor at back of ma
chine is furnished for operation on an alter
nating current of 110-120 volts, 25 to 75
cycles, or on 110-120 volts direct current.
Special motors can be provided through your
SINGER SEWING CENTER for direct or
alternating current for any voltage between 50
and 145, and for 32 volts direct current.
Before Inserting Electric Plug be sure that
voltage and number of cycles stamped on
motor nameplate are within range marked on
your electric meter installed by your power
company.
Electrical Connection. Push 3-pin terminal
plug on 3-pin terminal block at right of
machine and connect plug at other end of
cord to electrical outlet.
Speed Controller. The speed of machine is
regulated by amount of pressure on foot
controller.