Corded welting – SINGER 221K Featherweight User Manual
Page 35
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
33
Corded Welting
Cable cord comes in a variety of
sizes and when covered with a firmly
woven fabric makes a welting that is
an excellent seam finish.
This welting is prepared in advance
and then stitched into the seam. Cut a
true bias strip 1^4 inches wide, plus
three times the width of the cord of
either self or contrasting fabric. Sew
strips together on the lengthwise grain
to obtain desired length.
THE ZIPPER FOOT (ConI’d)
strip, raw
Adjust zipper foot to left side of
needle.
Encase cord in bias
edges even.
Lower presser bar.
Stitch close to cord, using a stitch
length
slightly
longer
than
for
regular seaming.
Do not crowd stitching against
cord.