The binder, Inserting the binding – SINGER 221K Featherweight User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
28
THE BINDER
The binder is used to apply commercial
binding as well as self-fabric bias to an
unfinished edge.
This colorful trim is attractive when
applied to children’s wear, aprons and
household textiles. It is a practical finish
for seam edges that ravel and for making
bound seams.
Pre-folded
commercial
bias
tape
is
inserted from the right into slot of the
binder scroll.
•
Cut the binding diagonally to form a
long point.
•
Insert pointed end
into slot and pull
through scroll.
Self-fabric binding
should be cut
wide on the true
bias.
Inserting the Binding
•
Insert
unfolded
binding
directly into opening at end
of scroll and
pull through.
As binding passes through scroll raw
edges are turned in.