Button sewing – SINGER W671 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
lever gradually to the left toward “5” the machine will sew a zigzag seam of
increasing width, depending on the position of the lever. (Fig. 21)
When sewing buttonholes, the stopper ‘"B" will be found useful. This stopper
serves as a stop for the lever “A”.
To set the stopper “ B ”, loosen the stop lock
" C " ,
move the stopper to the
desired position, tighten the stop lock “ C ”,
Button sewing
(1)
Raise the needle bar to its highest point.
Raise the presser bar, remove the regular
presser foot, and attach the button sewing
presser foot. (Fig. 22)
(2)
Drop the feed by pressing down the drop
feed
button
“DARN”
on
the
right
hand
corner of the bed. (Fig. 23)
(Pig. 22)
(3)
Set
the
zigzag
width
lever
“ A” to 5 or less, according to
the distance between the holes
in the button.
(4)
Place the fabric under . the
presser foot
(5)
Place the button between the
presser foot and the fabric,
(Fig- 23)
with the holes in a horizontal line and lower the presser foot.
14