SINGER W671 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(Pig. 31)
Next, twist the shuttle race ring clasps outward
(Fig. 31). then take out the shuttle race ring.
Carefully
remove
the
shuttle
and
clean
out
the shuttle race.
Replace the shuttle, the shuttle ring, and lock
with the clasps. Be careful not to drop or
otherwise damage the shuttle. (Fig. 31)
the bolibin case. (Fig. 30)
To oil the machine
To ensure easy and free working of the
machine, it is necessary that all moving
parts be covered with a film of oil and
not be allowed to become dry.
The
shuttle
race
should
also
be
oiled
frequently.
The
machine
should
be
oiled
at
the
places indicated by arrows in Fig. 32 and
Fig. 33.
To remove the face plate, loosen the face
plate set screw. (Fig. 1—13)
After
oiling,
run
the
machine
rapidly
for
a
few
minutes
to
■work the oil into the bearings.
When in constant use the machine
should
be
oiled
two
or
three
times a week.
(Fig. 32)
(Fig. 33)
20