SINGER W671 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
bobbin is filled, the latch automaticallr
disengages
and
stops
the
winding
operation. (Fig. 5)
By using the spool-pin on tlte machine
bed vD) spare bobbins can be wound
and
prepared
without
interfering
with
your sewing.
(Fig. 4'i
ARM THREAD
GUIDE
ARM SPOOL
P1N_,
(A)
BOBBIN
WINDER
(Fig. 5)
To thread the Bobbin Case
Hold the bobbin between the thumb and fore
finger of your right hand and pull out two or
three inches of thread.
Holding the bobbin case in your left hand, turn
the open side up and place the threaded bobbin
into it. (Fig. 6)
g)
SPINDLE
(C)
PUSH
BUTTON
(B)
BOBBIN
WINDER
TENSION
BRACKET
Advertising