Turkish stitch, Hemstitching, Stretch overedge stitch – SINGER 9124 User Manual

Page 18: Overedge seam, Ric-rac/straight stretch stitch, Topstitching, Crown/fagoting

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TURKISH STITCH

The Turkish Stitch can be used for appliqu6ing, joining patchwork or forming decorative

hems on bed and table linens.

HEMSTITCHING

Fold a double hem of desired width and

baste.

• Mark a guideline for hemstitching on

right side of fabric just above top of hem
edge.

RECOMMENDED SETTINGS

Stitch Selection:

Turkish Stitch

Stitch Width:

II :: 8 II

Stitch Length:

3-1/2 to 4

Foot:

Special Purpose (J)

Needle Plate:

General Purpose

(A)

Adjust balance. if necessary

Place work, right side up with hem

facing right, under presser foot.

Lower presser foot and stitch along

guideline.

Be sure stitches on left side of line fall

over hem edge (into single thickness of
fabric) and stitches on right side fall

into double fold of hem.

STRETCH OVEREDGE STITCH

With this stitch you can stitch and finish a seam in one step. It is also ideal for finishing
seams, hems and facings requiring stretch.

OVEREDGE SEAM

Baste seams.

Trim seam edge 1/4" (6mm) from basting

line.

RECOMMENDED SETTINGS

Stitch Selection:

Stretch Overedge
Stitch

Stitch Width:

p

Stitch Length:

3-1/2 to 4

Foot:

Special Purpose

(J)

Needle Plate:

General Purpose

(A)

Adjust balance, if necessary

Position trimmed seam under presser
foot, as shown.

Stitch along basting line.

Straight stitches should fall on basting
line; zig-zag stitches should fall over
seam edge.

Remove basting stitches and press.

RIC-RAC/STRAIGHT STRETCH STITCH

This is a heavy-duty, stretch stitch that can also be used for topstitching.

TOPSTITCHING

Sew seams in usual manner and press.

• For topstitching hard-to-reach areas,

convert machine to free arm sewing.

RECOMMENDED SETTINGS
Stitch Seiection:

Ric-Rac/Straight
Stretch Stitch

Stitch Width:

II

::

H II

1

1

la«i "IF“

Stitch Length:

3-1/2 to 4

Foot:

Special Purpose

(J)

Needle Plate:

General Purpose

(A)

Adjust balance, if necessary

Place garment right side up, under foot.

Slowly topstitch desired areas.

Pull threads to wrong side of fabric; tie

and trim.

To create a straight stretch stitch, set

stitch width to the left and stitch length
to #4.

CROWN STITCH/FAGOTING STITCH

(if your machine has ^ pattern.)

Use these stitches fagoting, embroidery, patchwork or strengthening seams.

CROWN/FAGOTING

This is an open, lacy stitch used to join

two pieces of fabric.

• Fold under edges to be joined and press.

• Baste the edges 1/8" (3mm) apart onto

a sheet of tissue paper for support.

• Position center of work under center of

presser foot.

RECOMMENDED SETTINGS
Stitch Selection:

Crown Stitch
Fagoting Stitch

Stitch Width:

Stitch Length:

3-1/2 to 4

Foot:

Special Purpose

(J)

Needle Plate:

General Purpose

(A)

Adjust balance, if necessary

As you sew, the needle should make a
stitch first in one fabric strip, and then
in the other.

After stitching is completed, remove
tissue and basting.

33

Advertising
This manual is related to the following products: