Removing the work – SINGER W571 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
14
REMOVING THE WORK
Be sure to stop the machine when the thread take-up
lever and needle bar are at their highest position.
Now raise the presser foot and draw the fabric back
and to the left, (Fig. 21-A and B), and pass the thread over
the thread cutter.
Pull
down
slightly,
holding
thread
in
both
hands,
so
as not to bend the needle.
Leave the ends of thread under the presser foot.
Fig. 21-A
Fig. 21-B
li
1='
I
►
►
w
1»
ilf
I*
§, ^
Advertising