SINGER W571 - Manual (Page 36)

35
ill
I
I -3
I
I
■ Q
I
!!7
s
Fig. 51
EDGESTITCHER
The edgestitcher is used in making
dainty lace insertions, edgings and
pipings.
The slots in the edgesticher serve
as guides in sewing together various
pieces of material. If you want to
sew
lace, lace and embroidery, or
lace and tucked strips together,
place the piece of material that will
be on top in slot 1 (Fig. 53) and
the
lower fabric in slot 4. For
instance, if you are sewing lace
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessary to remove the presser foot
and replace it with the attachment foot (Fig. 51).
Mount binder, edgestitcher or hemmers, sliding the
attachment to the left as far as possible and tighten
screw.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. Just move
the attachment to the correct position before tighten­
ing the mounting screw.
Fig. 52 Fig. 53
orl m-n t s J --------- X -
1
-