Blind stitch hem – SINGER W571 User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5 o
19
BLIND STITCH HEM
To make a blind stitch hem follow next steps:
(1) Set needle position lever at ”R".
(2) Set buttonhole lever at "M".
(3) Set stitch length dial at 3.
(4) Set pattern selector lever for blind stitch (
!
Blind stitch hems provide a durable hem finish that is almost invisible and comparable to
hand sewing.
Prepare the garment in the same manner as for hand hemming.
STEP
1
STEP
STEP
COMPLETED
Step 1. (Fig. 33) If hem with folded edge is used make first fold deep.
Step 2. Turn hem to the depth desired and baste from upper edge. Press in place.
Step 3. Fold hem back toward right side of garment leaving extended.
Step 4. Place meterial under presser foot, sew with stitchlength set to suit material being