Accessories (fig. 49) – SINGER W571 User Manual
Page 30
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2S
77/
4. Clean, the shuttle race, the shuttle and shuttle race cover by removing all threads, lint, etc.
5. Apply a drop of oil with finger tip to outer edge of shuttle.
When the cleaning has been completed, proceed as follows to replace the shuttle assembly :
1. Turn the balancewheel until the needle reaches its highest position.
2. Place shuttle body, (D), against shuttle driver and adjust into position.
3.
Replace shuttle race cover, (C), fitting pin at lower
edge into notch, and lock into position with shuttle
race cover
clamps,
(B),
making certain
the clamps
have been snapped securely into position.
4. Put bobbin into bobbin case.
5.
Put the bobbin case into the shuttle race, fitting
tongue into notch E of race cover.
ACCESSORIES (Fig. 49)
1. Plastic Oiler (Sealed and Filled)
2. Package of Needles (5)
3. Large Screw Driver
4. Small Screw Driver
5. Quilter Guide
6. Cloth Guide
7. Button Sewing Foot
8. Buttonhole Foot
9. Presser Foot for Straight Sewing
10. Narrow Hemmer
11. Cord and Zipper Foot
12. Thumb Screw
13. Felt Washers (2) (for spool pins)
14. Bobbins (3)
Fig. 49
I®- N®®dle Plate for Straight Sewing