Threading the, Bobbin case – SINGER W571 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
n
THREADING THE
BOBBIN CASE
Step 1 (illustrated in Fig. 6).
Hold
bobbin
case
between
thumb
and forefinger of left hand so that
the slot in the edge of the bobbin
case is on top. Take the bobbin
between
thumb
and
forefinger
of
right hand so that the thread on
top leads from left to right. Step
2.
Insert bobbin into bobbin case,
pull the thread into the slot of the
bobbin case as shown in Fig. 7. and
draw
it
under
the
tension
spring
and
into
the
fork-shaped
opening
of the spring as shown in Fig. 8.
A
SLOT
li
5
N SPRIWG
Advertising