Removing the work, Fig. 21b, Llii – SINGER W711 User Manual
Page 12: S e w
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
12
p r e p a r i n g
t o
s e w
Have take-up lever at highest pornt before startxng to sew. Do not try to help the reedxr
by pXg the
.s this m.y defied the needle and duse .. to nrean.
KTFVFR run machine without material under presser oo..
v
;^farL?e”.l and th.ada .n
are now ready to begin sewing. By having need
The speed of t;'
l^nt r.e^gll:t;\r=rU’'d“„/re
P.ednee eneded on the oondol
llii:
■ 7'
REMOVING THE WORK
Be sure to stop the machine
when
the
thread
take-up
lever
and needle bar are at tne highest
position.
Now
raise
the
presser
foot
and draw the fabric back and to
the left (Fig.
21
, A and B1 and pass
the threads over the thread cutter.
Pull
down
slightly,
holding
thread in both hands, so as not
to bend the needle.
^
Leave the ends of thread un
der the presser foot.
/■
Fig. 21B